- Covers 85-300 HP, 2-Stroke
- 1995-2002
- Shop Manual
________________________________________________________________________________________
- Covers 80 - 300 HP 2-Stroke
- 1992-1996 Repair Manual
________________________________________________________________________________________
- Covers all 65-300 Hp, V4, V6 and V8 engines
- 1992-2001
- Repair Manual
________________________________________________________________________________________
18-1243 Thermostat Valve Spring
(V4/V6 Crossflow)
________________________________________________________________________________________
18-2391 Thermostat Grommet - V4 Crossflow
- The Sierra 18-2391 Grommet is interchangeable with the following: GLM 86481, Evinrude/Johnson 321692. Each Sierra product meets or exceeds the original equipment part it replaces.
- Sierra Grommet
- Meets or exceeds the original equipment quality
- Sierra part number: 18-2391
________________________________________________________________________________________
________________________________________________________________________________________
18-3211 Marine Impeller Repair Kit
________________________________________________________________________________________
18-3315-2 Water Pump Kit With Housing
- For 90/115 SL (1995-up)
- 120/125ESX (1993-1994)
- 120/130/140/150/175 V6 & V8 (1993-up)
________________________________________________________________________________________
18-3346 Cup and Plate Assembly
________________________________________________________________________________________
18-3390 Water Pump Repair Kit Without Housing
________________________________________________________________________________________
18-3391 Water Pump Housing Kit - With Housing
- Sierra Water Pump Kit with Housing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-3391
- Interchangeable with the following: GLM 12103, Evinrude/Johnson 395072
- Contains: 18-2557 Impeller Gasket, 18-2704 Grommet, 18-2769 Rubber Seal, (4) 18-3136 Bolt, 18-3153 Bolt, 18-3299 Impeller Key, 18-3346 Cup and Plate Assembly
________________________________________________________________________________________
18-3392 Water Pump Repair Kit Without Housing
________________________________________________________________________________________
18-3543 Marine Thermostat
________________________________________________________________________________________
Sierra 18-3564 Poppet Relief Valve - V4 Crossflow
- Sierra Poppet Relief Valve
- Meets or exceeds the original equipment quality
- Sierra part number: 18-3564
- Interchangeable with the following: GLM 46170, Evinrude/Johnson 318395
________________________________________________________________________________________
18-3673 Thermostat Kit for V-4 Crossflow
- Sierra Thermostat Kit
- Contains: 18-0675 Thermostat Gasket, 18-0977 Thermostat Gasket, 18-2391 Grommet, 18-3564 Poppet Relief Valve, 18-1243 Valve Springs, 18-3543 Thermostat
- Sierra part number: 18-3673
- Interchangeable with the following: GLM 13270
________________________________________________________________________________________
435526 Chrome Water Pump Kit
________________________________________________________________________________________
435990 Water Pump Impeller Housing
Note: 90/115 HP 1995-2006 Looper (except SL Model)
________________________________________________________________________________________
________________________________________________________________________________________
18-1291 Gear Set
For: Commercial V4 gearcases
Gear Set Contents:
________________________________________________________________________________________
18-1350 Carrier Needle Bearing
- Sierra Carrier Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1350
- Interchangeable with the following: GLM 22860, Evinrude/Johnson 379504, OMC 379504
________________________________________________________________________________________
18-1351 Carrier Needle Bearing
- Sierra Carrier Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1351
- Interchangeable with the following: GLM 22870, Evinrude/Johnson 382407, OMC 382407
________________________________________________________________________________________
18-1357 Pinion Needle Bearing
- Sierra Pinion Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1357
- Interchangeable with the following: GLM 22880, Evinrude/Johnson/OMC 384195
________________________________________________________________________________________
18-1365 Thrust Bearing
- Sierra Thrust Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1365
- Interchangeable with the following: GLM 16330, Evinrude/Johnson 387656, 383248, OMC 387656
- Thrust Driveshaft Johnson/Evinrude 90-250hp OMC Stringer/Cobra All Models
________________________________________________________________________________________
18-1366 Thrust Bearing
- Sierra Thrust Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1366
- Interchangeable with the following: GLM 16300, Evinrude/Johnson 382408
________________________________________________________________________________________
18-1371 Thrust Forward Bearing
- Sierra Thrust Forward Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1371
- Interchangeable with the following: GLM 16310, Evinrude/Johnson 385043, OMC 385043, 3852221
________________________________________________________________________________________
18-2216 Sliding Clutch
- Sierra Sliding Clutch
- Meets or exceeds the original equipment quality
- Sierra part number: 18-2216
- Interchangeable with the following: GLM 22625, Evinrude/Johnson 337772, 37774, 334516, 336562, 910995, Mallory 9-72534, OMC 910995, 334516
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
18-2221 Gear Set
- Sierra Gear Set
- Meets or exceeds the original equipment quality
- Sierra part number: 18-2221
- Interchangeable with the following: GLM 22630, Mallory 9-73560
- Fit specific, check part numbers to ensure proper fit
Gear Set Contents:
________________________________________________________________________________________
18-2229 Driveshaft Shim
.003", 1.24 ID
________________________________________________________________________________________
18-2230 Driveshaft Shim
.004", 1.24" ID
________________________________________________________________________________________
18-2231 Driveshaft Shim
.005", 1.24" ID
________________________________________________________________________________________
18-2251 Prop Shaft
- Sierra Prop Shaft
- Meets or exceeds the original equipment quality
- Sierra part number: 18-2251
- Interchangeable with the following: GLM 22417, Evinrude/Johnson 5004765, 436740, 435022, 433017
- Fit specific, check part numbers to ensure proper fit
________________________________________________________________________________________
- Sierra Lower Drive Shaft
- Meets or exceeds the original equipment quality
- Sierra part number: 18-2277
- Interchangeable with the following: GLM 22409, Evinrude/Johnson 335722
- Fit specific, check part numbers to ensure proper fit
________________________________________________________________________________________
18-2326 Upper Drive Shaft Assembly
- Long
- Sierra Upper Drive Shaft Assembly
- Meets or exceeds the original equipment quality
- Sierra part number: 18-2326
- Interchangeable with the following: GLM 22433, Evinrude/Johnson 436232
- Fit specific, check part numbers to ensure proper fit
________________________________________________________________________________________
18-2327 Upper Drive Shaft Assembly
________________________________________________________________________________________
18-2330 UPPER DRIVE SHAFT (Extra Long)
________________________________________________________________________________________
18-6525 Throttle Cable (41")
- Sierra Throttle Cable
- Meets or exceeds the original equipment quality
- Sierra part number: 18-6525
- Interchangeable with the following: Evinrude/Johnson 397003, 389987, 392965
________________________________________________________________________________________
18-9219 Lower Drive Shaft
- Sierra Lower Drive Shaft
- Meets or exceeds the original equipment quality
- Sierra part number: 18-9219
- Interchangeable with the following: GLM 22407, Evinrude/Johnson 335677
- Lower Drive Shaft for Some Johnson Evinrude 90 to 225 HP Replaces 345905 335677
________________________________________________________________________________________
Fits the following Evinrude Johnson Outboards (15 Spline)
- 90 HP V-4 1995-Newer
- 100 HP V-4 Commercial 1884-Newer
- 115 HP V-4 1995-Newer
- 130 HP V-4 1995 Newer
- 120 - 140 HP V-4 1985
- 140 HP V4 1989-1994
- 150 HP V-6 1978-Newer
- 150 HP V-6 Commercial 1993-Newer
- 155 HP V-6 Commercial 1978-Newer
- 175 HP V-6 1977-Newer
- 185 HP V-6 1984-1985
- 200 HP V-6 1976-Newer
- 225 HP V-6 1986-Newer
- 235 HP V-6 1978-1985
- 250 HP V-6 2001-Newer
- 2.6 Liter V6 1984-1985
- 250 HP V-8 1991-Newer
- 275 HP V-8 1986-1988
- 300 HP V-8 1986-1995
- 3.6 Liter V-8 1986-1987
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Aluminum Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
10 |
Michigan 011015 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
13 |
OMC 391536 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
15 |
OMC 391535 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
15 |
Michigan 011006 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
17 |
OMC 391200 |
Amazon |
eBay |
20-26 foot boats, All Loads Ski. |
17 |
Michigan 011007 |
Amazon |
eBay |
20-26 foot boats, All Loads Ski. |
19 |
OMC 391201 |
Amazon |
eBay |
18-22 foot boats, All Loads Ski. |
19 |
Michigan 011008 |
Amazon |
eBay |
18-22 foot boats, All Loads Ski. |
21 |
OMC 391202 |
Amazon |
eBay |
17-19 foot boats, All Loads Ski. |
21 |
Michigan 011009 |
Amazon |
eBay |
17-19 foot boats, All Loads Ski. |
23 |
OMC 391203 |
Amazon |
eBay |
15-18 foot boats, All Loads Ski. |
23 |
Michigan 011010 |
Amazon |
eBay |
15-18 foot boats, All Loads Ski. |
Other compatible propeller options:
90 - 300 HP Aluminum Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)
90 - 300 HP Stainless Steel Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)
Return to Propellers:
________________________________________________________________________________________
Fits the following Evinrude Johnson Outboards
- 40-140 HP (Large Gearcase & Thru-Hub Exhaust)
- 13 Tooth Spline, 4-1/4 inch gearcase
- Be sure to count the number of spline teeth on your prop shaft.
- 40-140 HP (Large Gearcase & Thru-Hub Exhaust) Pleasure
- 40 HP E-TEC 2004-Newer
- 50 HP 2 Cyl 1971-1974
- 50 HP 3 Cy 1994 & 1998
- 50 HP E-TEC 2004-Newer
- 55 HP 3 Cyl 1968-1969
- 55 HP E-TEC 2009-Newer
- 60 HP 3 Cyl 1970-1971, 1986-2001
- 60 HP E-TEC 2004-Newer
- 60 HP 4-Stroke 1998-Newer
- 65 HP 3 Cyl 1972-1973
- 65 HP Pontoon Series 2014-Newer
- 70 HP 3 Cyl 1974-Newer
- 70 HP 4-Stroke 1998-Newer
- 75 HP 3 Cyl 1975-1984
- 75 HP 2004-Newer
- 85 HP 1969-1980, 1991-1995
- 88 HP 1981-Newer
- 90 HP 1981-Newer
- 90 HP E-TEC 2004-Newer
- 100 HP 1979-1980, 1988-Newer
- 110 HP 1986-1989
- 115 HP & 115 HP HO 1973-Newer
- 115 HP E-TEC 2004-Newer
- 120 HP 1986-1994
- 125 HP 1971-1972
- 130 HP E-TEC 2009-2010
- 135 HP 1973-1976
- 140 HP 1977-1984, 1986-1994
- 45-140 HP (Large Gearcase & Thru-Hub Exhaust) Commercial
- 45 HP 2 Cyl 1986-1995
- 45 HP 1986-Newer
- 50 HP 2 Cyl 1977-1979
- 55 HP 2 Cyl 1980-Newer
- 60 HP 1971-1974
- 65 HP 1972-1973
- 65 HP 3 Cyl 1984 -2001
- 70 HP 3-Cyl. 1974-2001
BRP Evinrude Viper Stainless Steel for Runabouts and General Recreation
If you want speed, you want the Viper prop. It's longer swept blades and larger diameter give this prop a better grip on the water faster acceleration, and greater top-end speed. Excellent on any recreational boat, from runabouts and cruisers to deck boats.
- V6 - Standard Rotation
- V4 - Standard Rotation
- Versatile 3-Blade performance
- Excellent balance of speed and durability
- Recommended for runabout, deck/flats, multi-species, offshore and pontoon boats.
- Pressed In Rubber Hub
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Size |
15 |
BRP 763929 |
Amazon |
eBay |
13 7/8 x 15, RH, 3-Blade, SS |
17 |
BRP 763930 |
Amazon |
eBay |
13 7/8 x 17, RH, 3-Blade, SS |
19 |
BRP 763931 |
Amazon |
eBay |
13 7/8 x 19, RH, 3-Blade, SS |
21 |
BRP 763932 |
Amazon |
eBay |
13 7/8 x 21, RH, 3-Blade, SS |
BRP Evinrude Rogue Stainless Steel for Small Runabouts and Flats Boats
- Provides extra stern lift
- Stays on plane with minimum RPM
- Custom high luster finish
- 4 Blade, Right Rotation
- Pressed In Rubber Hub
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Size |
13 |
BRP 763964 |
Amazon |
eBay |
13 1/2 x 13, RH, 3-Blade, SS |
15 |
BRP 763965 |
Amazon |
eBay |
13 1/4 x 15, RH, 3-Blade, SS |
17 |
BRP 763966 |
Amazon |
eBay |
13 x 17, RH, 3-Blade, SS |
19 |
BRP 763967 |
Amazon |
eBay |
13 x 19, RH, 3-Blade, SS |
21 |
BRP 763968 |
Amazon |
eBay |
13 x 21, RH, 3-Blade, SS |
BRP Evinrude Raker H.O. for Bass Boats and High Performance
- Set the highest standards in top speed performance
- Maximizes the superior power and torque of Evinrude E-TEC G2 engine
- Superior bow lift
- Vented hub for faster acceleration
- Recommended for multi-species (fiberglass only) bass and sport runabout
- Pressed In Rubber Hub
OMC and Michigan Stainless Steel
- Pressed-In Rubber Hub
- 13 Tooth Spline, 4-1/4 inch gearcase
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
13 |
BRP 763957 |
Amazon |
eBay |
13-3/4 x 13 Right 3-Blade
|
15 |
BRP 763950 |
Amazon |
eBay |
13-3/8 x 15, Right, 3-Blade |
15 |
OMC 389949 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
15 |
Michigan 013028 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
17 |
BRP 763951 |
Amazon |
eBay |
13-1/4 x 17, Right, 3-Blade |
17 |
OMC 389948 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
17 |
Michigan 013030 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
19 |
BRP 763952 |
Amazon |
eBay |
13-1/8 x 19, Right, 3-Blade |
19 |
OMC 389510 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
19 |
Michigan 013033 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
21 |
OMC 389512 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
21 |
Michigan 013034 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
Michigan Rapture Performance Stainless Steel
- Pressed-In Rubber Hub
- 13 Tooth Spline, 4-1/4 inch gearcase
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
15 |
Michigan 013076 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
16 |
Michigan 063042 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
17 |
Michigan 013077 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
17 |
Michigan 063043 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
19 |
Michigan 013078 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
19 |
Michigan 063044 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
21 |
Michigan 013079 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
21 |
Michigan 063045 |
Amazon |
eBay |
14-16 foot boats, Light Loads |
Michigan Apollo Stainless Steel, XHS Drop-In Hub
Note: For 60 HP & 70 HP 4-Stroke engine applications, 1998 & Newer, use XHSII 210 Drop-In Hub Kit. For all other engine, applications use XHS 206 Drop-In Hub Kit
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
15 |
Michigan 993143 |
Amazon |
eBay |
13-3/8 x 15, Right, 3 Blade |
15 Left |
Michigan 993153 |
Amazon |
eBay |
13-3/8 x 15, Left, 3 Blade |
17 |
Michigan 993144 |
Amazon |
eBay |
13-1/4 x 17, Right, 3 Blade |
17 Left |
Michigan 993154 |
Amazon |
eBay |
13-1/4 x 17, Left, 3 Blade |
19 |
Michigan 993145 |
Amazon |
eBay |
13-1/8 x 19, Right, 3 Blade |
19 Left |
Michigan 993155 |
Amazon |
eBay |
13-1/8 x 19, Left, 3 Blade |
21 |
Michigan 993146 |
Amazon |
eBay |
13 x 21, Right, 3 Blade |
21 Left |
Michigan 993156 |
Amazon |
eBay |
13 x 21, Right, 3 Blade |
Michigan Ballistic High-Performance Stainless Steel
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
15 |
Michigan 933415 |
Amazon |
eBay |
13-5/8 x 15, Right, 3-Blade |
15 |
Michigan 335030 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
17 |
Michigan 933417 |
Amazon |
eBay |
13-1/2 x 17, Right, 3-Blade |
17 |
Michigan 335031 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
19 |
Michigan 933419 |
Amazon |
eBay |
13-3/8 x 19, Right, 3-Blade |
19 |
Michigan 335032 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
21 |
Michigan 933421 |
Amazon |
eBay |
13-1/8 x 21, Right, 3-Blade |
21 |
Michigan 335033 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
.
Other compatible propeller options:
40 - 140 HP Aluminum Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust
40 - 140 HP Stainless Steel Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust
Return to Propellers:
________________________________________________________________________________________
Fits the following Evinrude Johnson Outboards
- 40-140 HP (Large Gearcase & Thru-Hub Exhaust)
- 13 Tooth Spline, 4-1/4 inch gearcase
- Be sure to count the number of spline teeth on your prop shaft.
- 40-75 HP (Large Gearcase & Thru-Hub Exhaust) Pleasure
- 40 HP E-TEC 2004-Newer
- 50 HP 2 Cyl 1971-1974
- 50 HP 3 Cy 1994 & 1998
- 50 HP E-TEC 2004-Newer
- 55 HP 3 Cyl 1968-1969
- 55 HP E-TEC 2009-Newer
- 60 HP 3 Cyl 1970-1971, 1986-2001
- 60 HP E-TEC 2004-Newer
- 60 HP 4-Stroke 1998-Newer
- 65 HP 3 Cyl 1972-1973
- 65 HP Pontoon Series 2014-Newer
- 70 HP 3 Cyl 1974-Newer
- 70 HP 4-Stroke 1998-Newer
- 75 HP 3 Cyl 1975-1984
- 75 HP 2004-Newer
- 85 HP 1969-1980, 1991-1995
- 88 HP 1981-Newer
- 90 HP 1981-Newer
- 90 HP E-TEC 2004-Newer
- 100 HP 1979-1980, 1988-Newer
- 110 HP 1986-1989
- 115 HP & 115 HP HO 1973-Newer
- 115 HP E-TEC 2004-Newer
- 120 HP 1986-1994
- 125 HP 1971-1972
- 130 HP E-TEC 2009-2010
- 135 HP 1973-1976
- 140 HP 1977-1994
- 45-140 HP (Large Gearcase & Thru-Hub Exhaust) Commercial
- 45 HP 2 Cyl 1986-1995
- 45 HP 1986-Newer
- 50 HP 2 Cyl 1977-1979
- 55 HP 2 Cyl 1980-Newer
- 60 HP 1971-1974
- 65 HP 1972-1973
- 65 HP 3 Cyl 1984 -2001
- 70 HP 3-Cyl. 1974-2001
Michigan Vortex Aluminum Props, XHS Drop-In Hub
- B Series Propellers Using XHS 206 or XHSII 210 Drop-In Hub Kit
- 13 Tooth Spline, 4-1/4 inch Gearcase, Thru-Hub Exhaust
- Do NOT use Gearcase Adapter Ring Supplied with the propeller.
- Note: For 60 HP & 70 HP 4-Stroke engine applications, 1998 & Newer, use XHSII 210 Drop-In Hub Kit. For all other engine, applications use XHS 206 Drop-In Hub Kit
- Note: When replacing Interchangeable Hub Evinrude aluminum propeller with Michigan Match, Michigan Match Thrust Washer P/N 990406 is required.
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
10 |
Michigan 992109 |
Amazon |
eBay |
14 x 10, Right, 3-Blade |
11 |
Michigan 992111 |
Amazon |
eBay |
14 x 11, Right, 3-Blade |
11 |
Michigan 941411 |
Amazon |
eBay |
13-7/8 x 11, Right, 4-Blade |
13 |
Michigan 992112 |
Amazon |
eBay |
14 x 13, Right, 3-Blade |
13 |
Michigan 941413 |
Amazon |
eBay |
13-7/8 x 13, Right, 4-Blade |
15 |
Michigan 992113 |
Amazon |
eBay |
13-3/4 x 15, Right, 3-Blade |
15 |
Michigan 941415 |
Amazon |
eBay |
13-3/8 x 15, Right, 4-Blade |
17 |
Michigan 992114 |
Amazon |
eBay |
13-1/4 x 17, Right, 3-Blade |
17 |
Michigan 941417 |
Amazon |
eBay |
13 x 17, Right, 4-Blade |
19 |
Michigan 992115 |
Amazon |
eBay |
13 x 19, Right, 3-Blade |
19 |
Michigan 941419 |
Amazon |
eBay |
12-1/2 x 19, Right, 4-Blade |
21 |
Michigan 992116 |
Amazon |
eBay |
12-3/4 x 21, Right, 3-Blade |
BRP Evinrude/Johnson OMC and Michigan Aluminum Propellers
Note: When replacing Interchangeable Hub Evinrude aluminum propeller with Michigan Match, Michigan Match Thrust Washer P/N 990406 is required.
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
9 |
BRP 177201 |
Amazon |
eBay |
Hydrus for Pontoon and Work Boats |
9 |
BRP 763300 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
11 |
BRP 177202 |
Amazon |
eBay |
Hydrus for Pontoon and Work Boats |
11 |
BRP 763301 |
Amazon |
eBay |
Cruisers, House Boats, Trolling7633000 |
11 |
OEM 382761 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
11 |
Michigan 012047 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
12 |
Michigan 012075 4-Blade |
Amazon |
eBay |
19-22 foot boats, All Loads |
13 |
BRP 177203 |
Amazon |
eBay |
Hydrus for Pontoon and Work Boats |
13 |
BRP 765181 |
Amazon |
eBay |
766325 Hub Kit |
13 |
OEM 391668 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
13 |
Michigan 011001 |
Amazon |
eBay |
Cruisers, House Boats, Trolling |
15 |
BRP 765182 |
Amazon |
eBay |
766325 Hub Kit |
15 |
OEM 391198 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
15 |
Michigan 011002 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
15 |
Michigan 061001 |
Amazon |
eBay |
17-19 foot boats, All Loads, Ski |
17 |
BRP 765183 |
Amazon |
eBay |
766325 Hub Kit |
17 |
OEM 391199 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
17 |
Michigan 011003 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
17 |
OEM 176214 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
17 |
Michigan 011024 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
17 |
Michigan 061002 |
Amazon |
eBay |
15-18 foot boats, All Loads, Ski |
19 |
BRP 765184 |
Amazon |
eBay |
766325 Hub Kit |
19 |
OEM 390896 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
19 |
Michigan 011004 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
19 |
OEM 176215 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
19 |
Michigan 011025 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
19 |
Michigan 061003 |
Amazon |
eBay |
14-16 foot boats, All Loads, Ski |
21 |
BRP 765185 |
Amazon |
eBay |
766325 Hub Kit |
21 |
OEM 389788 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
21 |
Michigan 011005 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
21 |
OEM 176216 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
21 |
Michigan 011026 |
Amazon |
eBay |
13-15 foot boats, All Loads, Ski |
21 |
Michigan 061004 |
Amazon |
eBay |
14-16 foot boats, Light Loads |
Other compatible propeller options:
40 - 140 HP Aluminum Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust
40 - 140 HP Stainless Steel Propellers for Large 4-1/4" Gearcase and Thru-Hub Exhaust
Return to Propellers:
________________________________________________________________________________________
Fits the following Evinrude Johnson Outboards (15 Spline)
- 90 HP V-4 1995-Newer
- 100 HP V-4 Commercial 1884-Newer
- 115 HP V-4 1995-Newer
- 130 HP V-4 1995 Newer
- 120 - 140 HP V-4 1985
- 140 HP V4 1989-1994
- 150 HP V-6 1978-Newer
- 150 HP V-6 Commercial 1993-Newer
- 155 HP V-6 Commercial 1978-Newer
- 175 HP V-6 1977-Newer
- 185 HP V-6 1984-1985
- 200 HP V-6 1976-Newer
- 225 HP V-6 1986-Newer
- 235 HP V-6 1978-1985
- 250 HP V-6 2001-Newer
- 2.6 Liter V6 1984-1985
- 250 HP V-8 1991-Newer
- 275 HP V-8 1986-1988
- 300 HP V-8 1986-1995
- 3.6 Liter V-8 1986-1987
Pitch is how far, in inches, the boat would travel with one prop rotation (under ideal conditions). Higher pitch = Faster, Lower Pitch = Slower and more power.
OMC and Michigan Stainless Steel
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
15 Right |
OMC 174926
|
Amazon |
eBay |
Cruisers and House Boats |
15 Right |
Michigan 013052
|
Amazon |
eBay |
Cruisers and House Boats |
15 Left |
OMC 174927
|
Amazon |
eBay |
Cruisers and House Boats |
15 Left |
Michigan 013051
|
Amazon |
eBay |
Cruisers and House Boats |
17 Right |
OMC 391290
|
Amazon |
eBay |
20-26 foot, All Loads, Ski |
17 Right |
Michigan 013044
|
Amazon |
eBay |
20-26 foot, All Loads, Ski |
17 Left |
OMC 431930
|
Amazon |
eBay |
20-26 foot, All Loads, Ski |
17 Left |
Michigan 013042
|
Amazon |
eBay |
20-26 foot, All Loads, Ski |
19 Right |
OMC 389924
|
Amazon |
eBay |
18-22 foot, All Loads, Ski |
19 Right |
Michigan 013046
|
Amazon |
eBay |
18-22 foot, All Loads, Ski |
19 Left |
OMC 390821
|
Amazon |
eBay |
18-22 foot, All Loads, Ski |
19 Left |
Michigan 013045
|
Amazon |
eBay |
18-22 foot, All Loads, Ski |
21 Right |
OMC 389923
|
Amazon |
eBay |
17-19 foot, All Loads, Ski |
21 Right |
Michigan 013048 |
Amazon |
eBay |
17-19 foot, All Loads, Ski |
21 Left |
OMC 390822 |
Amazon |
eBay |
17-19 foot, All Loads, Ski |
21 Left |
Michigan 013047 |
Amazon |
eBay |
17-19 foot, All Loads, Ski |
23 Right |
OMC 389019 |
Amazon |
eBay |
15-18 foot, All Loads, Ski |
23 Right |
Michigan 013050 |
Amazon |
eBay |
15-18 foot, All Loads, Ski |
Michigan Rapture Performance Stainless Steel
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
15 Right |
Michigan 013064 |
Amazon |
eBay |
Heavy Boats, House Boats |
15 Left |
Michigan 013065 |
Amazon |
eBay |
Heavy Boats, House Boats |
17 Right |
Michigan 013066 |
Amazon |
eBay |
20-26 foot, All Load, Ski |
17 Left |
Michigan 013067 |
Amazon |
eBay |
20-26 foot, All Load, Ski |
19 Right |
Michigan 013068 |
Amazon |
eBay |
18-22 foot, All Load, Ski |
19 Left |
Michigan 013069 |
Amazon |
eBay |
18-22 foot, All Load, Ski |
21 Right |
Michigan 013070 |
Amazon |
eBay |
17-19 foot, All Load, Ski |
21 Left |
Michigan 013071 |
Amazon |
eBay |
17-19 foot, All Load, Ski |
23 Right |
Michigan 013072 |
Amazon |
eBay |
15-18 foot, All Load, Ski |
23 Left |
Michigan 013073 |
Amazon |
eBay |
15-18 foot, All Load, Ski |
25 Right |
Michigan 013074 |
Amazon |
eBay |
Up to 17 foot, All Load, Ski |
25 Left |
Michigan 013075 |
Amazon |
eBay |
Up to 17 foot, All Load, Ski |
Michigan Ballistic High-Performance Stainless Steel
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
15 Right |
Michigan 345031 |
Amazon |
eBay |
Cruisers, House Boats |
17 Right |
Michigan 345032 |
Amazon |
eBay |
20-26 foot, All Loads, Ski |
17 Left |
Michigan 345062 |
Amazon |
eBay |
20-26 foot, All Loads, Ski |
19 Right |
Michigan 345033 |
Amazon |
eBay |
18-22 foot, All Loads, Ski |
19 Left |
Michigan 345063 |
Amazon |
eBay |
18-22 foot, All Loads, Ski |
21 Right |
Michigan 345034 |
Amazon |
eBay |
17-19 foot, All Loads, Ski |
21 Left |
Michigan 345064 |
Amazon |
eBay |
17-19 foot, All Loads, Ski |
25 Right |
Michigan 345035 |
Amazon |
eBay |
15-18 foot, All Loads, Ski |
25 Left |
Michigan 345065 |
Amazon |
eBay |
15-18 foot, All Loads, Ski |
Other compatible prop options:
90 - 300 HP Aluminum Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)
90 - 300 HP Stainless Steel Propellers for V-6 Gearcase (15 Spline and Thru-Hub Exhaust)
Return to Propellers:
________________________________________________________________________________________
6211188 Starter Drive Assembly
- Fits: 9.9/15 4-Stroke, (1997 & up)
- Fits 85 thru 115 (1973-1999) Crossflow - (Sierra 18-5634, OEM 586283, 584613 Starter)
________________________________________________________________________________________
18-5697 Starter Brush and Spring Set
- Sierra Brush and Spring Set
- Meets or exceeds the original equipment quality
- Sierra part number: 18-5697
- Interchangeable with the following: Arco BK900, Chrysler F15164, 74384, Evinrude/Johnson 385952, Mercury 75384, 57390, 63292, 753841, 898265016, Mercury 75384
________________________________________________________________________________________
Power Trim Relay 586224 582472 584416 18-5705 Johnson Evinrude OMC
________________________________________________________________________________________
________________________________________________________________________________________
18-6780 Tilt/Trim Motor
- Fit specific, check part numbers to ensure proper fit
- Evinrude Johnson Trim/ Tilt Motor 2 Wire 4 Bolt Mount
- 90/115 Crossflow (with Fastrack Midsection)
- V6 Commercial
________________________________________________________________________________________
18-7038 Carburetor Needle and Seat
________________________________________________________________________________________
________________________________________________________________________________________
18-7093 Sierra Carburetor Needle and Seat
________________________________________________________________________________________
18-7247 Carb Kit
- Sierra Carburetor Kit
- For V4 and V6, 1988-2001
- Sierra part number: 18-7247
- Interchangeable with the following: Evinrude/Johnson 438996, 436852, 435442, Mallory 9-37102
________________________________________________________________________________________
18-4303 Sierra Powerhead Gasket Set
- Gasket Kit, Powerhead Johnson/Evinrude V4 Crossflow 1977-1992
- Replaces: 439085,391300 18-4303-1, 389556, 39080, 391300, 439085, 9-64112
Gasket Set Contents:
- 18-0850 Fuel Pump Mtg Gasket 303615 1
- 18-2876 By-Pass Cover Gasket 307133 4
- 18-2866 Exhaust Cover Gasket 317914 2
- 18-0953 Water Passage Gasket 317951 1
- 18-0117 Exhaust Plate Gasket 317995 1
- 18-2873 Gasket 318335 2
- 18-2956 Water Jacket Head Gasket 318358 2
- 18-2867 Manifold to Crankcase Gasket 319174 1
- 18-2857 Air Silencer to Carb. Gasket 386573, 319771 2
- 18-0985 Air Silencer Gasket 321722 1
- 18-2864 Adapter to Powerhead Gasket 321727 1
- 18-0991 Leaf Plate Gasket 321907 4
- 18-2547 Water Pass.Cover Gasket 322858 1
- 18-0102 Exhaust ManifoldGasket 323469 1
- 18-0134 Intake Plate Gasket 326926 1
- 18-0977 Thermostat Gasket 332369 2
________________________________________________________________________________________
Fits 90 degree V4, 60 degree (1995-2000), 115 V4 60 degree (1995-2000)
________________________________________________________________________________________
________________________________________________________________________________________
18-3898 Low Compression Head Gasket
- Sierra Head Gasket
- Meets or exceeds the original equipment quality
- Sierra part number: 18-3898
- Interchangeable with the following: GLM 35650, Evinrude/Johnson 332819
________________________________________________________________________________________
18-70937 Port Cylinder Head Hose (Port)
________________________________________________________________________________________
Sierra 18-70936 Cylinder Head Hose (Starboard)
________________________________________________________________________________________
________________________________________________________________________________________
18-5179 Ignition Plug In Coil
________________________________________________________________________________________
18-5770 Power Pack for Crossflow
- Sierra Power Pack
- Meets or exceeds the original equipment quality
- Sierra part number: 18-5770
- Interchangeable with the following: CDI 113-4028, Evinrude/Johnson 584028, Mallory 9-25021
________________________________________________________________________________________
________________________________________________________________________________________
- Unique anti-fouling design
- Engineered to exceed OE designs
- Maximum durability
- Designed for easy starting
- Gap 0.03
________________________________________________________________________________________
Also see: CHAMPION MARINE SPARK PLUG 5939 Marine Stainless Steel
- Evinrude Johnson 0.030 Gap
Mercury Outboards
- 125 HP 2004-1994 4-Cylinder
- 115 HP 2004-1989 4-Cylinder 2-Stroke
- 100 HP 1999-1988 4-Cylinder
- 90 HP 2006-1987 3-Cylinder 2-Stroke
- 80 HP 1989-1978
- 80 HP 2004-1995 80 Jet
- 75 HP 2006-1987 3-Cylinder 2-Stroke 2-Stroke
- 75 HP 1986-1984 4-Cylinder
- 75 HP 2001-1990 75 Sea Pro 2-Stroke
- 70 HP 1989-1987
- 65 HP 2004-1995 65 Jet
- 60 HP 2002-1991 3-Cylinder
- 60 HP 2004-1995 60 Big Foot 3-Cylinder
- 60 HP 2004-1991 60 Sea Pro 3-Cylinder
- 55 HP 2004-1992 55 Sea Pro
- 50 HP 2004-1991 50 3-Cylinder 2-Stroke 2-Stroke
- 45 HP 1989-1986
- 45 HP 2003-199 545 Jet 3-Cylinder
- 40 HP 2004-1995 2-Cylinder
- 40 HP 2004-1997 3-Cylinder
- 40 HP 1997-1988 4-Cylinder
- 40 HP 2004-1995 40 Sea Pro
- 30 HP 2003-1995 2-Cylinder 2-Stroke 2-Stroke
- 30 HP 2001-1998 30 Jet 3-Cylinder
- 30 HP 1997-1995 30 Jet 3-Cylinder
- 30 HP 2004-1995 30 Sea Pro 2-Cylinde
- 25 HP 2004-1980 2-Cylinder 2-Stroke 2-Stroke
- 25 HP 2002-1993 25 Sea Pro 2-Cylinder
- 20 HP 1981-1970
- 20 HP 2003-1986 2-Cylinder 2-Stroke
- 20 HP 2004-1995 20 Jet 2-Cylinder
- 10 HP 1996-1991
- 10 HP 2004-1991 10 Sea Pro
- 10 HP 1998 XR10
- 9.9 HP 1994-1986
- 9.8 HP 1978-1970
- 7.5 HP 1978-1970
- 4.5 HP 1985-1975
- 4 HP 1987-1986
- 4 HP 1974-1973
- 4 HP 1972
- 4 HP 1971-1970
________________________________________________________________________________________
________________________________________________________________________________________
- Johnson/Evinrude Gap 0.03
Also see: Champion (5931) Stainless Steel Marine Spark Plug
Mercury Outboard
- 110 HP 1969-1967 1100 0.03
- 95 HP 1969-1967 950 0.03
- 65 HP 1969-1967 650S 0.03
- 50 HP 1969-1967 500M 0.03
- 50 HP 1969-1967 500S 0.03
- 35 HP 1969-1967 350 0.03
- 20 HP 1969-1967 110 0.03
- 20 HP 1969-1967 200 0.03
- 11 HP 1969-1967 110 0.03
- 11 HP 1969-1967 200 0.03
________________________________________________________________________________________
Sierra 18-1353 Center Main Bearing
- Sierra Center Main Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1353
- Interchangeable with the following: GLM 22810, Evinrude/Johnson 5007190, 387041
________________________________________________________________________________________
18-1374 Wrist Pin Bearing
- Sierra Wrist Pin Rod
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1374
- Interchangeable with the following: GLM 16220, Evinrude/Johnson 395627, Mallory 9-51103, Wiseco W5217
________________________________________________________________________________________
18-1377 Center Main Bearing
- Sierra Center Main Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1377
- Interchangeable with the following: GLM 22710, Evinrude/Johnson 352960, 320499
________________________________________________________________________________________
18-3904 Marine Piston Ring
3.500 inch Standard Bore
________________________________________________________________________________________
18-3905 Marine Piston Ring
- 4 and 6 cylinder
- 3.53 inch bore (.03 oversize)
- OMC 396504
________________________________________________________________________________________
18-4040 Marine Needle Bearing
________________________________________________________________________________________
18-4075 Connecting Rod Bolt
- Replaces OEM part # 308186
________________________________________________________________________________________
18-4100 Piston Kit .030 Oversize
- 3.53 inch (.03 oversize)
- OMC 396585, 396588
- GLM Part Number: 24030; Sierra Part Number: 18-4100; OMC Part Number: 5006669
________________________________________________________________________________________
18-4110 Piston
- 4 and 6 Cylinder
- 3.52 inch bore size (.02 oversize)
________________________________________________________________________________________
18-4120 Piston Kit - Standard Bore
- Sierra Piston Kit
- 85-300 HP, 4 and 6 cylinder
- Bore Size: 3.500 (Standard Bore)
- Sierra part number: 18-4120
- Interchangeable with the following: GLM 24010, Evinrude/Johnson 393271, 393924, 5006658. 5006661, Mallory 9-53420, Wiseco 3073PS, 3173PS
- Fit specific, check part numbers to ensure proper fit
________________________________________________________________________________________
5006687 Piston Kit Stand Bore Port
________________________________________________________________________________________
5006714 Piston Kit - .030 Oversize Port
________________________________________________________________________________________
5006716 Piston Kit - .030 Oversize Starboard
________________________________________________________________________________________
Sierra 18-1361 Rod Crank End Bearing
- ierra Rod Crank End Bearing
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1361
- Interchangeable with the following: GLM 22820, Evinrude/Johnson 387787, Mallory 9-51100
- Fit specific, check part numbers to ensure proper fit
________________________________________________________________________________________
Sierra 18-1386 Powerhead Bearing Kit
- Sierra Powerhead Bearing Kit
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1386
- Contains the following: 18-1353 Center Main Bearing, 18-1377 Center Main Bearing, 18-1374 Wrist Pin Bearing, 18-1395 Lower Crankshaft Bearing, 18-1361 Rod Crank Bearing
________________________________________________________________________________________
18-3906 Marine Piston Ring
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
18-3405 Water Pump Housing
________________________________________________________________________________________
18-7133 Marine O-Ring
ID: 3.780, Width: 0.135
________________________________________________________________________________________
434519 Johnson Evinrude OMC Trim & Tilt O-Ring & Seal Rebuild Kit
60-300 HP 1991-2006 TNT Units
________________________________________________________________________________________
5006688 Piston Kit - Standard Starboard
________________________________________________________________________________________
5006703 Piston Kit .020 Oversize
________________________________________________________________________________________
5006708 Piston - .020 Oversize Port
________________________________________________________________________________________
5006715 Piston Kit - .020 Oversize Starboard
________________________________________________________________________________________
Sierra 18-5632 Outboard Starter for Looper
________________________________________________________________________________________
18-5634 Starter for V4 Crossflows
________________________________________________________________________________________