- Covers 2 - 40 HP 2-Stroke
- 1973-1990
- Outboard Shop Manual
________________________________________________________________________________________
- Covers all 1.25-60 Hp, 1 and 2-cylinder, 2-stroke models.
- 1973-1989
- Repair Manual
________________________________________________________________________________________
________________________________________________________________________________________
18-3367 Water Pump Housing
________________________________________________________________________________________
18-3382 Water Pump Repair Kit With Housing
________________________________________________________________________________________
18-3401 Water Pump Repair Kit Without Housing
________________________________________________________________________________________
18-3543 Marine Thermostat
________________________________________________________________________________________
18-3674 Thermostat Kit
- The Sierra 18-3674 Thermostat Kit is interchangeable with the following: GLM 13280. Contains: 18-1219 Grommet Gasket, 18-0182 Thermostat Gasket, 18-3135 Stainless Steel Bolt, 18-2546 Thermostat Gasket, 18-3567 Rubber Valve, 18-3562 Valve Cup, 18-1243 Valve Spring, 18-3563 Poppet Relief Valve, 18-3565 Retainer, 18-3543 Thermostat.
- Sierra Thermostat Kit
- 18-3543 Thermostat Included
- Sierra part number: 18-3674
- Interchangeable with the following: GLM 13280
________________________________________________________________________________________
- For Evinrude Johnson OMC BRP
- 15 HP E-Tech H.O. High Thurst, 2011 - Newer
- 20 HP 2 Cylinder 1984 - 1997
- 25 HP Commercial 1992 - Newer
- 25 HP 2 & 3 Cylinder 1984 - Newer
- 25 HP E-TEC 2990 - Newer
- 30 HP 2 Cylinder 1984 - Newer
- 30 HP E-TEC 2990 - Newer
- 35 HP 2 Cylinder 1979 - 1983
- 35 HP 3 Cylinder 1997-2001
15 H.O. - 35 HP Aluminum 14 Tooth Spline Drive
- Ruber Hub
- 14 Tooth Spline
- 3 Inch Gearcase
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
7 |
BRP 5008225 4-Blade |
Amazon |
eBay |
15 HP H.O. High Thurst, Trolling Kicker |
7 |
OMC 387320 |
Amazon |
eBay |
Cruisers & House Boats |
7 |
Michigan 012053 |
Amazon |
eBay |
Cruisers & House Boats |
9 |
BRP 765048 |
Amazon |
eBay |
Newer BRP Part |
9 |
OMC 386317 |
Amazon |
eBay |
17-20 foot Boats, All Loads, Ski |
9 |
Michigan 012054 |
Amazon |
eBay |
17-20 foot Boats, All Loads, Ski |
11 |
BRP 765135 4-Blade |
Amazon |
eBay |
Newer BRP Part |
11 |
BRP 765049 |
Amazon |
eBay |
Newer BRP Part |
11 |
OMC 175190 |
Amazon |
eBay |
16-18 foot Boats, All Loads, Ski |
11 |
Michigan 012055 |
Amazon |
eBay |
16-18 foot Boats, All Loads, Ski |
12 |
BRP 765136 4-Blade
|
Amazon |
eBay |
Newer BRP Part |
12 |
BRP 765050 |
Amazon |
eBay |
Newer BRP Part |
13 |
BRP 765137 4-Blade |
Amazon |
eBay |
Newer BRP Part |
13 |
BRP 778863 |
Amazon |
eBay |
Newer BRP Part |
13 |
OMC 175191 |
Amazon |
eBay |
15-17 foot Boats, All Loads, Ski |
13 |
Michigan 012056 |
Amazon |
eBay |
15-17 foot Boats, All Loads, Ski |
14 |
BRP 765138 4-Blade |
Amazon |
eBay |
Newer BRP Part |
15 |
BRP 765139 |
Amazon |
eBay |
Newer BRP Part |
15 |
OMC 763486 |
Amazon |
eBay |
13-15 foot Boats, All Loads, Ski |
15 |
OMC 390380 |
Amazon |
eBay |
13-15 foot Boats, All Loads, Ski |
15 |
Michigan 012057 |
Amazon |
eBay |
13-15 foot Boats, All Loads, Ski |
Evinrude Johnson BRP Stainless Steel Spline Drive
- Rubber Hub
- 14 Tooth Spline
- 3 Inch Gearcase
- Great props but hard to find.
Michigan Vortex Aluminum Spline Drive
- You MUST use 991224 Gearcase Adapter Ring supplied with the propeller.
- E Series Propellers Using XHS 118 or XHSII 218 Drop-In Hub Kit
- 14 Tooth Spline, 3-inch Gearcase
Pitch
inch
|
Part Number Link (More Info) |
Shop Amazon |
Shop eBay |
Recommended Use |
9 |
Michigan 992501 |
Amazon |
eBay |
17-20 foot, All Loads, Ski |
10 |
Michigan 992502 |
Amazon |
eBay |
17-20 foot, All Loads, Ski |
11 |
Michigan 992503 |
Amazon |
eBay |
16-18 foot, All Loads, Ski |
12 |
Michigan 992504 |
Amazon |
eBay |
16-18 foot, All Loads, Ski |
13 |
Michigan 992505 |
Amazon |
eBay |
15-17 foot, All Loads, Ski |
13 |
Michigan 992506 |
Amazon |
eBay |
15-17 foot, All Loads, Ski |
Ballistic High-Performance Stainless Steel Spline Drive
- E Series Propellers Using XHS 118 or XHSII 218 Drop-In Hub Kit
- 14 Tooth Spline, 3-inch Gearcase
________________________________________________________________________________________
18-1287 Forward Gear & Bushing
________________________________________________________________________________________
18-1293 Gear Set
Gear Set Contains:
________________________________________________________________________________________
18-2093 Drive Shaft Oil Seal
- For: 20 - 35 HP (1977-1995) seal for propshaft 18-2026, driveshaft 18-2033, upper crankcase 18-8351
- Size: 1.110, OD: 1.570, Width: 0.370
________________________________________________________________________________________
________________________________________________________________________________________
18-3717 Marine Prop Nut Kit
Prop Kit Contents:
________________________________________________________________________________________
18-3743 Marine Cotter Pin
1/8" x 3/4"
________________________________________________________________________________________
18-4229 Marine Thrust Washer
________________________________________________________________________________________
18-4232 Marine Prop Spacer
________________________________________________________________________________________
18-5697 Starter Brush and Spring Set
- Sierra Brush and Spring Set
- Meets or exceeds the original equipment quality
- Sierra part number: 18-5697
- Interchangeable with the following: Arco BK900, Chrysler F15164, 74384, Evinrude/Johnson 385952, Mercury 75384, 57390, 63292, 753841, 898265016, Mercury 75384
________________________________________________________________________________________
________________________________________________________________________________________
18-7042 Siearra Carb Kit
Note: 25, 35 HP 1995-Up Except 3 Cylinder Models
________________________________________________________________________________________
18-7093 Sierra Carburetor Needle and Seat
________________________________________________________________________________________
18-7222 Sierra Carb Kit With Float
________________________________________________________________________________________
18-7820 Fuel Pump Kit
- Sierra Fuel Pump Kit
- Contains 18-0850 Fuel Pump Gasket, 18-2900 Cap to Fuel Pump Gasket
- Sierra part number: 18-7820
- Interchangeable with the following: GLM 40820, Evinrude/Johnson 393103, Mallory 9-37702
________________________________________________________________________________________
18-7821 Fuel Pump Repair Kit
- The Sierra 18-7821 Fuel Pump Kit is interchangeable with the following: GLM 40830, Evinrude/Johnson 398514, 395867, Mallory 9-37700. Each Sierra product meets or exceeds the original equipment part it replaces.
- Sierra Fuel Pump Kit
- Meets or exceeds the original equipment quality
- Sierra part number: 18-7821
- Interchangeable with the following: GLM 40830, Evinrude/Johnson 398514, 395867, Mallory 9-37700
________________________________________________________________________________________
________________________________________________________________________________________
18-4307 Powerhead Gasket Set
Gasket Set Contents:
- 18-0850 Fuel Pump Mounting Gasket 303615 1
- 18-0971 By-Pass Gasket 319661 1
- 18-0981 Leaf Plate Gasket 321479 1
- 18-0106 Exhaust Manifold Gasket 324323 2
- 18-0118 Carburetor Gasket 325092 1
- 18-2862 Manifold to Leaf Plate Gasket 321573, 326260 1
- 18-0126 Inner Exhaust Cover Gasket 326264 1
- 18-2852 Powerhead to Lower Unit Gasket 330621 1
- 18-3803 Head Gasket 329419, 765012 1
________________________________________________________________________________________
18-5179 Ignition Plug In Coil
________________________________________________________________________________________
________________________________________________________________________________________
- Unique anti-fouling design
- Engineered to exceed OE designs
- Maximum durability
- Designed for easy starting
- Gap 0.03
________________________________________________________________________________________
- Johnson/Evinrude Gap 0.03
Also see: Champion (5931) Stainless Steel Marine Spark Plug
Mercury Outboard
- 110 HP 1969-1967 1100 0.03
- 95 HP 1969-1967 950 0.03
- 65 HP 1969-1967 650S 0.03
- 50 HP 1969-1967 500M 0.03
- 50 HP 1969-1967 500S 0.03
- 35 HP 1969-1967 350 0.03
- 20 HP 1969-1967 110 0.03
- 20 HP 1969-1967 200 0.03
- 11 HP 1969-1967 110 0.03
- 11 HP 1969-1967 200 0.03
________________________________________________________________________________________
18-1374 Wrist Pin Bearing
- Sierra Wrist Pin Rod
- Meets or exceeds the original equipment quality
- Sierra part number: 18-1374
- Interchangeable with the following: GLM 16220, Evinrude/Johnson 395627, Mallory 9-51103, Wiseco W5217
________________________________________________________________________________________
18-1378 Rod Bearing Complete
Johnson/Evinrude Rod Bearing for (18-135HP) Outboard
________________________________________________________________________________________
18-1391 Upper/Lower Crank Bearing
________________________________________________________________________________________
18-3911 Piston Rings .20 OS
- 3.020 / .020
- For 2&3 Cyl, Johnson/Evinrude 2 /3 HP
- Works with 18-4114 Piston
________________________________________________________________________________________
18-4040 Marine Needle Bearing
________________________________________________________________________________________
18-4107 PISTON KIT - Standard Bore
________________________________________________________________________________________
18-4127 Piston Kit - .030 Oversize
- .030 oversize
- All piston kits include rings, pin and retainers.
- 3.0 / .030 Bore
________________________________________________________________________________________
18-4329 Marine Crankshaft Seal Kit
________________________________________________________________________________________
Sierra 18-3910 Piston Ring Set - Standard Bore
- For Johnson/Evinrude 2 Cyl 25-35 HP mothrs with 3.000 inch bore.
________________________________________________________________________________________
Sierra 18-3912 Piston Rings - Bore 3.030/.030
For Johnson/Evinrude 2/3 Cylinder, 25-35 HP Motors
________________________________________________________________________________________
Sierra 18-4117 Piston Kit - 3.020/.020
- Sierra Piston Kit
- Meets or exceeds the original equipment quality
- Sierra part number: 18-4117
- Interchangeable with the following: Mallory 9-53413
________________________________________________________________________________________
________________________________________________________________________________________
18-7100 O-Ring
ID: 0.245, Width: 0.155
________________________________________________________________________________________
18-7101 Marine O-Ring
ID: 0.250, Width: 0.065
________________________________________________________________________________________
18-7111 O-Ring
ID: 0.197, Width 0.113
________________________________________________________________________________________
18-7120 O-Ring
ID: 0.215, Width: 0.065
________________________________________________________________________________________
18-7174 Marine O-Ring
ID: 0.620, Width: 1.100
________________________________________________________________________________________
18-7180 Marine O-Ring
ID: 0.445, Width: 0.090
________________________________________________________________________________________
18-2026 Marine Oil Seal for OMC
Size: 0.875, OD: 1.250, 0.188
________________________________________________________________________________________
Note: 40 HP - AR, AE, AT Models Only
Note: 50/60 HP, 1981-1983 Rope Start Only
Note: 60 HP 1980-1983 Rope Start Only
Size: 0.625, OD: 1.125, Width: 0.150
________________________________________________________________________________________
18-2033 Oil Seal
Size: 0.625, OD: 1.375, Width: 0.250
________________________________________________________________________________________
18-8350 Oil Seal, OMC 328603
Size: 1.100, OD: 1.690, Width: 0.320
________________________________________________________________________________________
18-4904 Starter Handle and Rope for Johnson/Evinrude
- Sierra Starter Handle and Rope Kit
- Rope size: #4.5
- Sierra part number: 18-4904
________________________________________________________________________________________
- Sierra Rewind Spring
- Meets or exceeds the original equipment quality
- Sierra part number: 18-6501
- Interchangeable with the following: Evinrude/Johnson 395460, 307573
- Fit specific, check part numbers to ensure proper fit
________________________________________________________________________________________
18-6512 Marine Starter Pawl
________________________________________________________________________________________