Evinrude/Johnson/OMC 35 HP 1985 Model 35RCO, 35RLCO

Clymer - 1973-1990  EVINRUDE/JOHNSON OUTBOARD 2-40 HP SHOP SERVICE MANUAL B732

• Covers 2 - 40 HP 2-Stroke
• 1973-1990
• Outboard Shop Manual

SELOC - Johnson/Evinrude Outboards 1973-89 Repair Manual #1302

• Covers all 1.25-60 Hp, 1 and 2-cylinder, 2-stroke models.
• 1973-1989
• Repair Manual

18-3051 Impeller

18-3359  Impeller Wear Plate

18-3367 Water Pump Housing

 18-3381 Water Pump Repair Kit Without Housing

• The Sierra 18-3381 Water Pump Kit without Housing is interchangeable with the following: GLM 12071, Evinrude/Johnson 0393509, 0393630, Mallory 9-48205.
• Sierra Water Pump Kit without Housing
• Meets or exceeds the original equipment quality
• Sierra part number: 18-3381
• Interchangeable with the following: GLM 12071, Evinrude/Johnson 0393509, 0393630, Mallory 9-48205

18-3382 Water Pump Repair Kit With Housing

18-3543 Marine Thermostat

• 143 deg farenheigt

18-3674 Thermostat Kit

• The Sierra 18-3674 Thermostat Kit is interchangeable with the following: GLM 13280. Contains: 18-1219 Grommet Gasket, 18-0182 Thermostat Gasket, 18-3135 Stainless Steel Bolt, 18-2546 Thermostat Gasket, 18-3567 Rubber Valve, 18-3562 Valve Cup, 18-1243 Valve Spring, 18-3563 Poppet Relief Valve, 18-3565 Retainer, 18-3543 Thermostat.
• Sierra Thermostat Kit
• 18-3543 Thermostat Included
• Sierra part number: 18-3674
• Interchangeable with the following: GLM 13280

15 H.O. - 35 HP Aluminum and Stainless Steel Propellers for Johnson Evinrude (Thru Hub Exhaust), 3" Gearcase, 14 Tooth Spline

• For Evinrude Johnson OMC BRP
• 15 HP E-Tech H.O.  High Thurst, 2011 - Newer
• 20 HP 2 Cylinder 1984 - 1997
• 25 HP Commercial 1992 - Newer
• 25 HP 2 & 3 Cylinder  1984 - Newer
• 25 HP E-TEC  2990 - Newer
• 30 HP 2 Cylinder 1984 - Newer
• 30 HP E-TEC  2990 - Newer
• 35 HP 2 Cylinder  1979 - 1983
• 35 HP 3 Cylinder  1997-2001

15 H.O. - 35 HP Aluminum  14 Tooth Spline Drive

• Ruber Hub
• 14 Tooth Spline
• 3 Inch Gearcase

Evinrude Johnson BRP Stainless Steel Spline Drive

• Rubber Hub
• 14 Tooth Spline
• 3 Inch Gearcase
• Great props but hard to find.

Michigan Vortex Aluminum Spline Drive

• You MUST use 991224 Gearcase Adapter Ring supplied with the propeller.
• E Series Propellers Using XHS 118 or XHSII 218 Drop-In Hub Kit
• 14 Tooth Spline, 3-inch Gearcase

Ballistic High-Performance Stainless Steel Spline Drive

• E Series Propellers Using XHS 118 or XHSII 218 Drop-In Hub Kit
• 14 Tooth Spline, 3-inch Gearcase

18-1287 Forward Gear & Bushing

18-1290 Marine Clutch Dog

For:  25-30 HP (1992-1998)

18-1293 Gear Set

• Gear Set for Johnson Evinrude
• Replaces 392475, 327655, 328313, 337020

Gear Set Contains:

• Part #       Desc.                O.E.#
• 18-1287  Forward Gear    392475
• 18-1289  Reverse Gear    327655
• 18-1288  Pinion                328313
• 18-1290  Clutch                337020

18-2093 Drive Shaft Oil Seal

• For: 20 - 35 HP (1977-1995) seal for propshaft 18-2026, driveshaft 18-2033, upper crankcase 18-8351
• Size: 1.110, OD: 1.570, Width: 0.370

18-2355 Marine Prop Shaft

For: 35, 40, 48, 50, 55, 60, 70, 75 HP 2 & 3 cyl outboards (1975-1987)

18-3717 Marine Prop Nut Kit

Prop Kit Contents:

• Part #     O.E. #   Description
• 18-3707  319891    Prop Nut
• 18-3743  320785    Cotter Pin
• 18-4232  323943    Prop Spacer

18-3743 Marine Cotter Pin

1/8" x 3/4"

18-4229 Marine Thrust Washer

18-4232 Marine Prop Spacer

18-5697 Starter Brush and Spring Set

• Sierra Brush and Spring Set
• Meets or exceeds the original equipment quality
• Sierra part number: 18-5697
• Interchangeable with the following: Arco BK900, Chrysler F15164, 74384, Evinrude/Johnson 385952, Mercury 75384, 57390, 63292, 753841, 898265016, Mercury 75384

Sierra International 18-5709 Marine Rectifier for Johnson/Evinrude Outboard Motor

173692 Regulator Rectifier 4 Wires for Johnson Evinrude 9.9-60 HP

18-5808 STARTER SOLENOID

18-7042 Siearra Carb Kit

Note: 25, 35 HP 1995-Up Except 3 Cylinder Models

18-7093 Sierra Carburetor Needle and Seat

18-7222 Sierra Carb Kit With Float

18-7820 Fuel Pump Kit 

• Sierra Fuel Pump Kit
• Contains 18-0850 Fuel Pump Gasket, 18-2900 Cap to Fuel Pump Gasket
• Sierra part number: 18-7820
• Interchangeable with the following: GLM 40820, Evinrude/Johnson 393103, Mallory 9-37702

438556 Evinrude Johnson OMC BRP Replacement Fuel Pump 20-140 HP

It of often cheaper to replace the entire fuel pump than to buy a repair kit.

18-3803 Head Gasket

18-4307 Powerhead Gasket Set

Gasket Set Contents:

• 18-0850 Fuel Pump Mounting Gasket 303615      1
• 18-0971 By-Pass Gasket                  319661        1
• 18-0981 Leaf Plate Gasket                321479       1
• 18-0106 Exhaust Manifold Gasket      324323      2
• 18-0118 Carburetor Gasket              325092        1
• 18-2862 Manifold to Leaf Plate Gasket 321573, 326260  1
• 18-0126 Inner Exhaust Cover Gasket   326264       1
• 18-2852 Powerhead to Lower Unit Gasket 330621   1
• 18-3803 Head Gasket           329419, 765012         1

 Champion (5828) Stainless Steel Marine Plug Spark Plug

• Unique anti-fouling design
• Engineered to exceed OE designs
• Maximum durability
• Designed for easy starting

396141 Power Pack

6-60 HP 2-Cylinder

Champion 828M Spark Plug Ql77JC4

Also see:  Champion (5828) Stainless Steel Marine Plug Spark Plug

Also Fits Mercury Outboard

• 280 HP 2002 Offshore  2.5L EFI
• 280 HP 2002 Sport, SS 2.5L EFI
• 18 HP 1985-1980
• 9.8 HP 1985-1979
• 7.5 HP 1985-1979

Champion L77JC4 (821M) Copper Plus Small Engine Spark Plug

• .030 Gap

See Also:  Champion (5828) Stainless Steel Marine Plug Spark Plug

18-1374 Wrist Pin Bearing

• Sierra Wrist Pin Rod
• Meets or exceeds the original equipment quality
• Sierra part number: 18-1374
• Interchangeable with the following: GLM 16220, Evinrude/Johnson 395627, Mallory 9-51103, Wiseco W5217

18-1378 Rod Bearing Complete

Johnson/Evinrude Rod Bearing for (18-135HP) Outboard

18-1391 Upper/Lower Crank Bearing

18-1393 Upper Crankshaft Bearing

18-3911 Piston Rings  .20 OS

• 3.020 / .020
• For 2&3 Cyl, Johnson/Evinrude 2 /3 HP
• Works with 18-4114 Piston

18-4075 Connecting Rod Bolt

• Replaces OEM part # 308186

18-4107 PISTON KIT - Standard Bore

• 2 Cylinder, 18-35Hp Outboards

• Johnson/Evinrude

• 3.000 / std.

18-4127 Piston Kit  -  .030 Oversize

• .030 oversize
• All piston kits include rings, pin and retainers.
• 3.0 / .030 Bore

18-4329 Marine Crankshaft Seal Kit

Sierra 18-3910 Piston Ring Set - Standard Bore

• For Johnson/Evinrude 2 Cyl 25-35 HP mothrs with 3.000 inch bore.

Sierra 18-3912 Piston Rings - Bore 3.030/.030

For Johnson/Evinrude 2/3 Cylinder, 25-35 HP Motors

Sierra 18-4117 Piston Kit - 3.020/.020

• Sierra Piston Kit
• Meets or exceeds the original equipment quality
• Sierra part number: 18-4117
• Interchangeable with the following: Mallory 9-53413

18-1289 Reverse Gear

18-7100 O-Ring

ID: 0.245, Width: 0.155

18-7101 Marine O-Ring

ID: 0.250, Width: 0.065

18-7105 Marine O-Ring

ID: 0.750, Width 0.065

18-7108 Marine O-Ring

ID: 2.550, Width: 0.100

18-7109 Marine O-Ring

ID: 0.214, Width: 0.048

18-7111 O-Ring

ID: 0.197, Width 0.113

18-7120 O-Ring

ID: 0.215, Width: 0.065

18-7174 Marine O-Ring

ID: 0.620, Width: 1.100

18-7180 Marine O-Ring

ID: 0.445, Width: 0.090

18-2026 Marine Oil Seal for OMC

Size: 0.875, OD: 1.250, 0.188

18-2033 Oil Seal

Size: 0.625, OD: 1.375, Width: 0.250

18-4904 Starter Handle and Rope for Johnson/Evinrude

• Sierra Starter Handle and Rope Kit
• Rope size: #4.5
• Sierra part number: 18-4904

18-5629 Starter

Fits OMC 18-40 11 Tooth Drive Gear

Starter For OMC Johnson Evinrude Marine 20 25 28 30 35 40 HP

18-6501 Rewind Spring for Johnson/Evinrude

• Sierra Rewind Spring
• Meets or exceeds the original equipment quality
• Sierra part number: 18-6501
• Interchangeable with the following: Evinrude/Johnson 395460, 307573
• Fit specific, check part numbers to ensure proper fit

18-6512 Marine Starter Pawl