Evinrude/Johnson/OMC 5 HP 1987 Model 5BFCU, 5BFLCU

Clymer - 1973-1990  EVINRUDE/JOHNSON OUTBOARD 2-40 HP SHOP SERVICE MANUAL B732

• Covers 2 - 40 HP 2-Stroke
• 1973-1990
• Outboard Shop Manual

SELOC - Johnson/Evinrude Outboards 1973-89 Repair Manual #1302

• Covers all 1.25-60 Hp, 1 and 2-cylinder, 2-stroke models.
• 1973-1989
• Repair Manual

18-3091 Sierra Impeller

389577 Water Pump Housing

Note 4 HP 1985-1996 - Delux model only

396644 Water Pump Kit

324690 Evinrude Johnson Prop Shear Pin, Propeller Drive Pin

• For Johnson Evinrude with Pin Drive Propellers
• 4 HP Delux  1980-Newer
• 4.5 HP  1980-1991
• 5 HP  1980-Newer
• 5, 6 HP 4-Stroke  1997-2001
• 6 HP  1960-Newer
• 6 HP 4-Stroke  2003
• 7.5 HP  1980-1983
• 8 HP  1980-Newer
•  
• Sacrificial Part Designed to Break
• Helps prevent, or at least limit damage to your motor and prop if you hit something.
• You should have a few spares.
• Don't use the wrong, or make your shear pin from the wrong material!

Other Evinrude Johnson Prop Shear Pins, and Propeller Drive Pins

4-8 HP Aluminum Propellers for OMC Evinrude Johnson (Pin Drive)

• Non-Thru Hub Exhaust & Pin Drive
• Rubber Hub Bushing Michigan Part # 65-298

Fits the following Evinrude Johnson Outboards

• 4, 4.5 HP 1980-1986
• 4, 5 HP Delux 1986-1995
• 5, 6 HP 1991-2001
• 6, 7.5, 8 HP  1980-2005
• 7 HP Commercial 1991-2000
• .
• 5 HP 4-Stroke 1999-2003
• 6 HP 4-Stroke 1998-2003

You probably won't find them on Amazon.com, But they have them on eBay.

Return to Propellers:

18-7823 Fuel Pump Kit

439082 Powerhead Gasket Set

• Sierra Power Pack
• Meets or exceeds the original equipment quality
• Sierra part number: 18-5763
• Interchangeable with the following: CDI 113-2285, Evinrude/Johnson 582285, 583170, 586800, Mallory 9-25009

Sierra 18-3972 Piston Rings - 1.937/Std

• Sierra Piston Rings
• Meets or exceeds the original equipment quality
• Sierra part number: 18-3972
• Interchangeable with the following: Evinrude/Johnson 390082
• 5, 6, 7.5, 8, HP J/E/OMC 1986-1995

Sierra Standard Bore Inline Piston - 18-4069

• 5, 6, 7.5, 8 HP 1986-1995
• Standard Bore
• 1.937 inch bore

18-7111 O-Ring

ID: 0.197, Width 0.113

18-7118 O-Ring

ID: 0.300, Width: 0.135

18-7146 O-Ring

ID: 1.120, Width: 0.100

18-7168 Marine O-Ring

ID: 0.370, Width: 0.065

18-2023 Marine Oil Seal for OMC

Size: 0.554, OD: 1.062, Width: 0.312

18-2034 Oil Seal

Size: 0.437, OD: 0.937, Width: 0.188